IEC

IEC/TR 62443-3-1:2009(E) provides a current assessment of various cybersecurity tools, mitigation counter-measures, and technologies that may effectively apply to the modern electronically based IACSs regulating and monitoring numerous industries and critical infrastructures. It describes several categories of control system-centric cybersecurity technologies, the types of products available in those categories, the pros and cons of using those products in the automated IACS environments, relative to the expected threats and known cyber vulnerabilities, and, most important, the preliminary recommendations and guidance for using these cybersecurity technology products and/or countermeasures.

IEC TR 62443-2-3:2015(E) describes requirements for asset owners and industrial automation and control system (IACS) product suppliers that have established and are now maintaining an IACS patch management program. This Technical Report recommends a defined format for the distribution of information about security patches from asset owners to IACS product suppliers, a definition of some of the activities associated with the development of the patch information by IACS product suppliers and deployment and installation of the patches by asset owners. The exchange format and activities are defined for use in security related patches; however, it may also be applicable for non-security related patches or updates.

IEC 62443-3-3:2013 provides detailed technical control system requirements (SRs) associated with the seven foundational requirements (FRs) described in IEC 62443-1-1 including defining the requirements for control system capability security levels, SL-C(control system). These requirements would be used by various members of the industrial automation and control system (IACS) community along with the defined zones and conduits for the system under consideration (SuC) while developing the appropriate control system target SL, SL-T(control system), for a specific asset. The contents of the corrigendum of April 2014 have been included in this copy.

IEC 62541-13:2020 contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 62541-13:2020 is part of the overall OPC Unified Architecture specification series and defines the information model associated with Aggregates. This second edition cancels and replaces the first edition of IEC 62541-13, published in 2015. No technical changes but numerous clarifications. Also some corrections to the examples.

IEC 62443-2-4:2015 specifies requirements for security capabilities for IACS service providers that they can offer to the asset owner during integration and maintenance activities of an Automation Solution. The contents of the corrigendum of August 2015 have been included in this copy.

IEC 62714-3:2017 specifies the integration of geometry and kinematics information for the exchange between engineering tools in the plant automation area by means of AML.

IEC 62541-5:2020 which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 62541-5:2020 defines the Information Model of the OPC Unified Architecture. The Information Model describes standardized Nodes of a Server's AddressSpace. These Nodes are standardized types as well as standardized instances used for diagnostics or as entry points to server-specific Nodes. Thus, the Information Model defines the AddressSpace of an empty OPC UA Server. However, it is not expected that all Servers will provide all of these Nodes. This third edition cancels and replaces the second edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Added Annex F on User Authentication. Describes the Role Information Model that also allows configuration of Roles. b) Added new data types: "Union", "Decimal", "OptionSet", "DateString", "TimeString", "DurationString", NormalizedString", "DecimalString", and "AudioDataType". c) Added Method to request a state change in a Server. d) Added Method to set Subscription to persistent mode. e) Added Method to request resending of data from a Subscription. f) Added concept allowing to temporarily create a file to write to or read from a server in C.4. g) Added new Variable type to support Selection Lists. h) Added optional properties to FiniteStateMachineType to expose currently available states and transitions. i) Added UrisVersion Property to ServerType. This version information can be used for session-less service invocation.

IEC 61987-16:2016 provides an - operating list of properties (OLOP) for the description of the operating parameters and the collection of requirements for a density measuring equipment, and - device lists of properties (DLOP) for a range of density measuring equipment types describing them. The structures of the OLOP and the DLOP correspond with the general structures defined in IEC 61987-11 and agree with the fundamentals for the construction of LOPs defined in IEC 61987-10.

IEC 62832-2:2020 specifies detailed requirements for model elements of the Digital Factory framework. It defines the nature of the information provided by the model elements, but not the format of this information.

IEC 62443-4-2:2019 provides detailed technical control system component requirements (CRs) associated with the seven foundational requirements (FRs) described in IEC TS 62443-1-1 including defining the requirements for control system capability security levels and their components, SL-C (component). As defined in IEC TS 62443-1-1 there are a total of seven foundational requirements (FRs): a) identification and authentication control (IAC), b) use control (UC), c) system integrity (SI), d) data confidentiality (DC), e) restricted data flow (RDF), f) timely response to events (TRE), and g) resource availability (RA). These seven FRs are the foundation for defining control system security capability levels. Defining security capability levels for the control system component is the goal and objective of this document as opposed to SL-T or achieved SLs (SL-A), which are out of scope. Show less